Anycubic Mega S

Mega S #0Mega S #1Mega S #2

Properties

Build Volume 210 x 210 x 205 mm
Nozzle Diameter 0.4
Filament Diameter 1.75

Unterlagen

MarkeAnycubic
Maschinentyp 3D Printer
Technologie Schmelzschichtung (FDM)
Materialien PLA, ABS, Holz-PLA, Rubber-like (TPU), PETG
Webseitehttps://www.anycubic.com/products/anycubic-i3-mega-s
Durchschnittlicher Preis 179,00 $

Über Mega S

Mega-S is an FDM 3D printer from the Chinese manufacturer Anycubic, an experienced provider of affordable machines. Mega-S has a fairly common Cartesian frame design and key functions for decent quality printing. It has an average build volume of 16.14 x 15.95 x 17.83 in (210 x 210 x 205 mm) and a modular structure, which helps to set up the machine relatively quickly. Mega-S is an improved version of i3 Mega, though, the key differences between the two include a filament holder and a titan-like extruder.

Features:

  • Easy assembly;
  • Print resume function;
  • Filament outage detection;
  • Ultrabase print plate;
  • 3.5” Colorful touchscreen;
  • Metal frame;
  • Improved Titan extruder.
Check price on Affiliate

Mega-S has a sleek design and doesn’t stand out at first. However, many users find this machine a very reliable companion and favor it over similar printers. Let’s look closer at Mega-S.

Metal frame and Dual rail Y-axis

An unstable frame and wobbly Z-axis is some of the common issues FDM printing enthusiasts are battling. Mega-S has a full metal frame, which increases the structural stability. Additionally, it’s worth pointing out that the printing bed is guided by two rails rather than one, which makes Y-axis movement smoother. The electronics are also enclosed in metal and placed under the printing bed.

Anycubic Ultrabase

This self-developed printing bedplate became a staple of Anycubic’s FDM printers. Thanks to the porous glass texture, the plate helps prints to adhere and get easily removed after the bed is cooled down.

Titan-like Extruder

Mega-S features a slightly different type of extruder, similar to Titan, meaning that filament is guided through gears first. This change helps feed filament and print more evenly.

Filament and Power outage

Mega-S will let you know when you are running out of filament. It will also resume printing after a power outage if one happens. These features are pretty standard in modern FDM printers, though, still worth mentioning, especially since they work without fails on Mega-S.

Removable drivers of the motherboard

A nice little detail is that drivers can be removed from the motherboard. For experienced users that means easier upgrades or cheaper maintenance in case one driver breaks.

Z-axis homing

Mega-S doesn’t have auto or even semi-auto calibration but synchronizes both sides of the Z-axis. After the initial setup, Z-axis will even itself out after each homing.

Some small downsides

There are no significant issues or troublesome features to the machine. However, some details can be improved. For example, the power supply for Mega-S is 12V only, which is low in comparison to other modern models on the market, though enough for a machine of this size. Drivers for Mega-S are reliable but loud, so users concerned about the noise may want to upgrade that in the future. The main downside to Mega-S is the cooling fans, which are quite weak. Right from the box, they fail to provide proper cooling to the part at higher printing speeds. This particular detail is better to be upgraded at first, especially, if you plan to work with PLA plastics primarily. On the bright side, Mega-S is almost identical to i3 Mega, meaning all upgrades (which there are lots of thanks to the popularity of this printer) are interchangeable.

Mega-S improvements and Upgrades:

  • Anycubic i3 Mega X-Carriage [MK4] by ML3DPrinting – includes a whole bunch of handy things for axis tensioners, touch sensor (for bed leveling) and cooling fan duct.
  • Anycubic i3 Mega Tool Rig by mjuddi – simple tool holder for printing essentials.
  • Anycubic I3 Mega fan modification by Nilenium – upgrade for using two fans.

Bewertungen 4.4 6 reviews

Print Quality
Reliability
Ease Of Use
Failure Rate
Running Expenses
Software
Build Quality
Value
Customer Service
Community
It make Good Cheap Prints
03.12.2022
Fast and capable but the software is a killer. When the bed began to die it wouldn't give a thermal runaway error or anything, only after putting in a custom board and FW did I find the issue myself. A dream if you are willing to put in the little extra money and effort for a custom MB like and skr 1.4.
good
16.12.2021
The ANYCUBIC Mega S has been the most user friendly and value dense printer I have ever used. Producing Quality prints has never been easier or more cost effective.
Great Printer I have 2 of them Going to go for the larger on next
13.04.2021
A nice printer with an excellent quality