| Build Volume | 203 x 203 x 203 mm (8 x 8 x 8 in.) |
| Layer Resolution Low | 400 micron (0.016 in.) |
| Layer Resolution High | 100 micron (0.004 in.) |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Print Speed Min. | 50 mm/s |
| Print Speed Max. | 100 mm/s |
| Marke | Solidoodle |
| Maschinentyp | 3D Printer |
| Technologie | Schmelzschichtung (FDM) |
| Materialien | PLA, ABS |
| Webseite | |
| Durchschnittlicher Preis | 799,99 $ |
The Solidoodle 4 is our latest generation printer. With a new extruder, concealed components, and thumbwheel calibrations, it’s our easiest printer yet!
Standard Features:
• Creates plastic parts up to 8" x 8" x 8"
• Uses 1.75mm plastic filament (ABS/PLA)
• Heated Build Platform
• Resolution up to .1mm
• 13.5" x 14" x 15" case footprint (L x W x H)
• Internal Steel frame
• Powder coated steel enclosure
• Easy-open lid for quick access
• Internal case fan with air filter to vent build chamber
• Electronics mounted internally and thermally isolated from build chamber
• Thumbwheel calibration of platform height - no wrench required (Z-tab)
• Easy snap-in filament spool holder
• Fully Assembled & Tested
Tech Specs:
• Uses Fused Filament Fabrication (FFF) a.k.a Thermoplastic Extrusion Technology
• Solidoodle Motherboard
• Extruder moves in the horizontal plane (X-Y), Build Platform (moves in the vertical direction (Z)
• Spring loaded Acrylic Extruder with stepper motor, .4mm nozzle
• ABS filament recommended, but using PLA is possible.
• 100V-240V Universal Power Supply
