| Build Volume | 98 x 55 x 125 mm |
| Layer Resolution X | 100 microns |
| Layer Resolution Y | 100 microns |
| Layer Resolution Z | 20 microns |
| Layer Resolution Low | 100 micron (0.004 in.) |
| Layer Resolution High | 20 microns |
| Print Speed Min. | 5 mm/s |
| Print Speed Max. | 15 mm/s |
| Marke | SparkMaker |
| Maschinentyp | 3D Printer |
| Technologie | DUP (LCD-based Direct UV Printing) |
| Materialien | Harz, Castable Resin, Flexible Resin, Ceramic Resin |
| Webseite | |
| Durchschnittlicher Preis | 249,00 $ |
SparkMaker is a resin printer, which was successfully funded through Kickstarter. It uses an LCD screen to cure the resin. The printer is ready-to-use from the box. It had been mentioned numerous times as one of the most affordable resin printers on the market as well as an easy to use the machine. Sparkmaker comes with its own slicing software and allows to use of third-party resins.
Features:
