Prusa 3D Original Prusa i3 MK2

Properties

Build Volume	250 x 210 x 200 mm (9.8 x 8.3 x 8 in.)
Layer Resolution Low	200 micron (0.008 in.)
Layer Resolution High	50 micron (0.002 in.)

Unterlagen

prusa3d_manual_mk2_en_1.03.pdf

Bewertungen
Prusa 3D
4.7 4 reviews

Print Quality

Reliability

Ease Of Use

Failure Rate

Running Expenses

Software

Build Quality

Value

Customer Service

Community

Show reviews Hide reviews

IslandFab

15.03.2022

Great printer. Prusa has come along way since their MK3

Printer Room

22.06.2021

Runs really good for long hours with little down time. Once you have it running perfectly and all calibrated, the printer can run for months at a time without needing maintenance.

Some points of failure over time are the bearings (replace ~1-2 years of heavy use), fans (replaced hotend cooling fan once within the first year, replaced with a noctua and no problems since), plastic cooling fan shroud melting/deforming (replace once every 1-3 months, temperature of printer can cause this piece to warp faster), hotbed wires breaking (failed once after 4 years of almost constant use), PEI bed sheet (replaced 3 times, about once every year)

Grapha 3D Print

05.05.2021

Perfect 3D printer for a print farm. Software is great and print farm software even better

ED3DLab

11.02.2021

Very reliable product

Marke	Prusa 3D
Maschinentyp	3D Printer
Technologie	Schmelzschichtung (FDM)
Materialien	PLA, ABS, Nylon, Bronze PLA, Hochschlagfestes Plastik (HIPS), PET, Elastisches Plastik (FLEX), Holz-PLA, Ziegelstein PLA, Antistatisches Plastik (ABS-ESD7), PC (Polycarbonat), ASA, PET (T-Glase), Rubber-like (TPU), PETG , Carbon Fiber, POM (Delrin), colorFabb-XT (Amphora AM1800), Magnetic Iron PLA, ColorFabb XT CF20 (PET-G), nGen Amphora AM3300 (PET-G), PLA-CF, (taulman) PCTPE, Conductive PLA, PolyMax PLA, Marble PLA, nGen FLEX, PC-CF
Webseite	http://shop.prusa3d.com/en/3d-printers/59-original-prusa-i3-mk2-kit.html
Durchschnittlicher Preis	699,00 $

Über Original Prusa i3 MK2

Prusa i3 is a proven design with tens of thousands users all around the planet. Now you have a great opportunity to buy one directly from the author Josef Průša and support it's further development. All parts of this 3D printer are Open Source and are part of the RepRap project.

Bewertungen 4.7 4 reviews