Professional CoreXY Voron 2.4 with a heated, enclosed chamber. Tuned for accurate ABS/ASA and high-quality PLA/PETG. Filament is dried before printing; dimensional...Zeig mehr QC available on request.
Professional CoreXY Voron 2.4 with heated, enclosed chamber. Matched configuration and tuned profiles to my Red machine; same quality standards and tolerances....Zeig mehr Ideal for multi-part runs, larger batches, and repeat jobs. Filament is dried before printing; parts receive light cleanup. Dimensional QC available on request.
What this machine is best at
High-repeatability batch work and multi-part nests
Functional ABS/ASA parts; clean PETG/PLA visual parts
Tight tolerances on small components
Nozzles: 0.25 / 0.40 (standard) / 0.60 / 0.80 mm
Layer heights: 0.12–0.32 mm
Typical tolerances: ±0.20 mm under 100 mm; ±0.30 mm on larger spans
Quality and process
Enclosed, heated chamber to control warp on ABS/ASA
Filament dried and stored; parts de-stringed and lightly deburred
Spot-check with calipers for customer-provided critical dimensions
Before you order
Provide STL or 3MF in millimeters
Note critical dimensions and desired fit (press, slip, clearance)
Default strength: 3-4 perimeters
Guarantee:
Free reprint for manufacturing defects (design/file changes are quoted if a re-run is requested)
3D Modelle
Modellbilder
Andere Dateien
3D Modellbearbeitung ...
Benötigen Sie etwas Besonderes?
Fordern Sie ein kostenloses Angebot an
Total: 11.63
USD
Our site uses cookies. By continuing to use our site you are agreeing to our Privacy Policy
