3D model of thenewhobbyist
The models were repaired and checked for printability.
Usually once someone has a copy your STL for 3D printing it's pretty
...Zeig mehr difficult to keep your name attached to it, but I think I've found a way to fix that. I've been kicking around the idea of physically marking my digital designs but hadn't until recently found a practical way to do it.
I inserted a 1mm high set of initials (TNH) into the center of the print. At my current layer height of 0.3 mm this prints 3 layers of initials in the print before covering the top and continuing. The initials could easily be replaced with an image or logo that identifies the modeler.
I think this could be a good way for anyone from artists, engineers, and hobbyists to make their mark on their 3D designs. It's also pretty cool to see your printer "sign" prints as they're being printed. It's a good way to connect the cool object you're printing with the cool person that designed it.
1. Print the included STL
2. You will see my initials written out in the print's infill about 25% into the print.
http://twitter.com/TheNewHobbyist
