3D model of mrbaddeley
The models were repaired and checked for printability.
My first attempt at 3D designs, following a full size BB8 build I thought I'd
...Zeig mehr tackle R2D2. Here's a full size Dome (Work in progress). The lower and upper rings have holes for alignment which 1.75 filament can be used in on the edge to edge gaps. Top pie pieces have removable supports. All is designed for ABS to minimise shrinkage and warping. 28/5 added a board bracket (to be glued inside the dome), fits a Ardunio and an adafruit 16 channel servo controller along with a 12v - 5v dc convertor (the one's used in cars) as I'm using a 11.1v lipo battery.
Printer brand:
MakerBot
Printer:
MakerBot Replicator 2X
Rafts:
No
Supports:
Yes
Notes:
Generally most pieces are designed to use need minimum or no support. Recommend at least 3 layers (or 4) to allow for sanding to a smooth finish.
https://www.facebook.com/groups/mrbaddeley
