3D model of francfalco
The models were repaired and checked for printability.
Inspired by an existing design - my 3d printable version of a folding travel coat
...Zeig mehr hanger.
Just what you need when travelling. Light enough to pack in your case.
Particularly useful if you want to rinse out clothes when you are away or just hang stuff up.
2 configuration options for children or adult clothes.
Also includes a belt, tie, dress, light weight trousers hanging ability.
Enjoy!
Printer brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
Yes
Supports:
Yes
Resolution:
0.1
Infill:
50% or higher
Notes:
I've printed this version in standard PLA and its does seem stable, but I'll see longterm how the pivot joints hold up?rnABS, Nylon or other more stable materials may be more appropriate?.rnThe tolerance of the clip fit pivots are going to test the set up of your printer to the max!rnOver extrude and the parts won't 'clip' together.rnUnder extrude and it'll all be too loose!rnrnPrint 2 x parts:rnFolding_coat_hanger_E.stlrnFolding_coat_hanger_M.stl (supports needed)rnrnThe updated files of v2 have a peg and hole joint design. These joints should be firmly, but carefully 'wiggled' together until the peg clips into the hole - support the walls of the parts as you go.
http://twitter.com/francfalco
