3D model of francfalco
The models were repaired and checked for printability.
If you ever wanted a really massive divers watch desk clock -
your dreams have been
...Zeig mehr answered!
However, this little project isn't for the faint hearted!
131 individual parts (or thereabouts).
30 hours printing time - approx @ 0.2mm
(0.1 recommended).
50 metres of filament @ 3mm dia.
400g weight (approx)
This project will require model making skills and lots of patients!
Ideally, all parts should be printed at 0.2 or higher if possible and some fine tuning will be required to make parts fit.
Printed on the MB Rep 2 and Ultimaker 2
Printed with Faberdashery Bling Bling Gold, Robot Silver and Classic Black PLA.
Fully detailed printing spec and assembly instructions included.
Enjoy!
http://twitter.com/francfalco
