3D model of gamescape3d
The models were repaired and checked for printability.
Early Zombie, I'm going to release a bunch of my earlier works over the next
...Zeig mehr couple months as I've moved on to greener pastures. Should easily print with standard supports. will stand around 45mm feet to eyes.
ASSEMBLY REQUIRED:Will likely require xacto blade, or sanding, and superglue to assemble weapons/shields to figure. We advise the following settings for slicing
Layer height: Between .20- .10mm
auto_support: Between 2- 1.5
Fill Density: 40% or greater
http://twitter.com/GameScape3D
