PrintBot Crab von Sonja_3dstl

Modell von
loading...
Modellbeschreibung
3D model of bqeducacion
The models were repaired and checked for printability.

The PrintBot Crab is an educational robot that can walk as an hexapod and can grab...Zeig mehr objects with its pincers.

This modular robot has been designed to attach other components such as servos, LEDs, push buttons, a buzzer, and other sensors included in the product "Mi primer kit de robotica" ("My first robotics kit") distributed by bq.

Printed parts:
1xBattery_holder
1xCangrejo_body
1xCangrejo_central_legs
1xCangrejo_central_servo_support
1xCangrejo_eyes
1xCangrejo_pincers_LEFT
1xCangrejo_pincers_RIGHT
1xCangrejo_shell
2xCangrejo_axes_link
2xCangrejo_back_leg
2xCangrejo_front_leg
Electronic Components:
1 x Freaduino UNO (Arduino UNO derivative)
3 x Miniservos (ES08A or similar)
1 x 8 AAA battery holder
Optional Electronic Components:
1 x Bluetooth module
Hardware:
8 x AAA batteries
2 x M3x40 screw
2 x M3x35 screw
3 x M3x16 screw
8 x M3x12 screw
15 x M3 nut
4 x Little rubber bands
6 x Rubber ferrule (10mm diameter)

Ana de Prado Navarrete

Disclaimer
This thing and all other published material cannot be considered as a final product of bq and bq takes no responsibility of its use.
It must be considered as an experimental and early released product developed by the Innovation and Robotics Department staff with the intention to share it and test it as soon as possible within the community.
https://www.instagram.com/bq.educacion
Über den Autor des Modells
64 models uploaded
Genehmigtes Profil