A280C von that_guy_wit

loading...
Modellbeschreibung
3D model of casestudyno8
The models were repaired and checked for printability.

Print it out and defend Echo Base from the Imperials invading Hoth!

I felt like...Zeig mehr doing a blaster, so here it is, designed more so after the appearance in Battlefront 2.

There are round holes running through the central pieces that can be joined together by half inch rods to keep everything lined up, the top rod should measure about 22.5 inches and the lower 19.75 inches.

This is a large and support heavy project. Pieces 1-4, Scope Housing and the Iron Sight require support. Be sure to print 2 O-Rings and 3 Scope Buttons. All of the STLs are in the orientation I printed them in

Happy printing, Rebel Scum!
http://instagram.com/brad.harris.design
Über den Autor des Modells
27 models uploaded
Genehmigtes Profil