3D model of uwcharlie1983. The models were repaired and checked for printability.
There are two versions of this model:
Porsche_356_Speedster_Body_Shell = Just the
...Zeig mehr body of the 356 Speedster
Porsche_356_Speedster_Slot_Car_Body = The body plus internal reinforcements and chassis mounting provisions
Body shell thickness = 1.6 mm
Approximate scale = 1:32
I took Alex's model and closed all the panel gaps and gave the whole body surface a thickness. I then removed a quarter of that thickness to create the grooves that define the panel gaps for the hood, doors, and engine lid.
Printer brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
Yes
Resolution:
0.1 mm
Infill:
100%
Notes:
Printing this model requires supports. I've been using a zig zag pattern with 4.5mm spacing that has given results I'm very happy with.
As the model is thin (1.6 mm thick) I recommend printing with 100% infill. Although, depending on the number of shells you specify, the infill percentage may not even come into play.
