3D model of terrain4print. The models were repaired and checked for printability.
This is a set of modular elven treehouses. Print a stair piece, a second level
...Zeig mehr piece and glue them together. Use them as wood elves homes. They are suitable for about 28mm.
Print a walkway, two walkway clips and two clip-hole-boxes. Flip the walkway over and glue on the walkway clips. Put the clip-hole-boxes into the clips and, using the walkway as a guide, glue the clip-hole-box to the underside of the second level.
I print these with 5% infill.
http://twitter.com/KruseMarkus
