This is a case for a Raspberry Pi 3 that I created to look like a small Acorn Risc PC. See my <a
...Zeig mehr href="http://www.dorchester3d.com/printing/blog/2016/06/raspberry-pi-acorn-risc-os-case">blog article</a> for more pictures/information showing what cables fit this.
Has 2 USB slots in the front and 2 in the back, along with an Ethernet socket. There is a separate cover for the right-side of the case where the SD card is located allowing access to this.
There are square holes for 2 LED's like the original Risc PC and also a button which could be used as an on/off switch but this hasn't been tested.
