I am having some fish tanks, and they are fertilized with CO2. The main problem with glass diffusors is, that a lot of co2 is lost bringing it into the aquarium.
...Zeig mehr Bubbles move to the top and evaporate into the room.
So one of my tanks with 700ltr was consuming a 2kg bottle in no time.
The tanks are running with HMFs (Hamburger mat filters) and a simple pump behind.
I tried some glass diffusors under the pump, but the pump is noisy with "air" in it. So I thought about an inline reactor instead of a diffusor. Having started with a connector for the outlet tube, the concept evolved to a small tank, filled with Siporax.
The concept is simple and effective: Water is coming from the pump (300 l/hr) on top left, into the reactor. CO2 is coming in from the bottom, the CO2 tube is halfway or more to the top. This is preventing any leaking of gas on the top i have observed with some prototype. Water passes along, and CO2 is absorbed at a dramatic rate. You are hardly seeing some bubbles on the outlet, which is for the 150mm version. Just printing a 200 to see if that improves, if not gonna create a modular system. The water is then taking the inner tube to the top and leaves on the right. So it can be put inline for any 16/22 tube, without fiddling too much with tubes. In my case the pump was having a 12/16mm connector which fits nice into the larger tube.
The reactor is completely submerged, as always use transparent clear PETG (you should).
I am surprised the print (2 perimeters, 4 top/bottom with 0.4mm noozle) is airtight.
Further updates may follow.
