Oculus Rift CV1 Sensor Wallmount

Modell von
Gravatar image
loading...
Modellbeschreibung
Hi,
Small but sturdy little wallmount with 59 degrees tilt down...
You need to make fillet with a 1/4 20 tap
and insert the rubber o-ring that came with the...Zeig mehr sensor and the cable strength relief.
Don't over tighten the sensor...
You can use drywall screws to fix on the wall.
Good Rifting....
Über den Autor des Modells
Gravatar image
No uploads
Genehmigtes Profil